Windows & Ubuntu - DualBoot

Introduction

This page describes how to set up your computer in order to dual boot Ubuntu and Windows.

Back Up Your Data

Although this may seem obvious, it is important to backup your data files to an external backup medium before attempting a dual-boot install (or any other hard drive manipulation), in case your hard drive becomes corrupted during the process. External hard drives, USB flash drives, and multiple DVDs or CDs are useful as external backup media.

Have a Windows recovery CD/DVD available

Many computer manufacturers that pre-install Windows provide a Windows recovery/re-installation CD or DVD with the computer. However, many companies no longer ship a physical disk but instead create a hidden partition on the hard drive in which the recovery-disk information is stored. A utility is then usually provided which allows the user to burn a recovery/re-installation CD or DVD from it. If you are buying a new computer and intent on dual-booting, make sure you have (or can make) a physical Windows recovery/re-installation CD or DVD. If neither a CD/DVD nor a recovery partition/burning utility is provided by your computer manufacturer, you may need to telephone your vendor and ask for a CD or DVD (to which you are normally entitled under the Windows EULA).

It is very important to have such a physical recovery/re-installation CD/DVD prior to changing your hard drive, in case your hard drive becomes corrupted in the process (and the recovery partition thereby becomes unavailable for use).

Once you have created a physical backup disk from a restore-image partition on the hard-drive, the restore-image partition can either be removed or left in place. Ubuntu can be installed with it intact without problems.

Install Ubuntu after Windows

In general, a Windows OS should be installed first, because its bootloader is very particular and because Windows installers tend to overwrite the entire hard drive (potentially wiping out any other data stored on it). If Windows isn't already installed, install it first. If you are able to partition the drive prior to installing Windows, leave space for Ubuntu during the initial partitioning process. Then you won't have to resize your NTFS partition to make room for Ubuntu later (saving a bit of time).

When a Windows installation already occupies the entire hard drive, its partition needs to be shrunk, creating free space for the Ubuntu partition. See How to Resize Windows Partitions to learn how to do this.

This can be done through Control Panel -> Administrative tools -> Computer Management -> Disk Management. You can then use the partition manager to shrink the partitions. As a side note, you can only create free space to the right of a partition.

If you have resized the windows 7 /vista partitions and cannot boot up windows, you can use the instructions fromWindowsRecovery to fix it. Once free space has been created on the hard drive, it is easy to install Ubuntu as the second operating system (and it is done automatically) from the Ubuntu LiveCD. Allow the Ubuntu LiveCD to install to "largest available free space" (if you have left unallocated free space), or manually into a partition that you have already created for Ubuntu.

Install Ubuntu

• Download an Ubuntu LiveCD image (.iso) from Ubuntu Downloads and burn an Ubuntu LiveCD (see BurningIsoHowto).
• Insert the LiveCD into your CD-ROM drive and reboot your PC.
• If the computer does not boot from the CD (eg. Windows starts again instead), check your BIOS settings and adjust them so that booting from the CD is allowed.
• Proceed with installation until you are asked this question: "How do you want to partition the disk ?".

Resizing Partitions Using the Ubuntu Installer

Automatic partition resizing

• Choose the First Option (It should be something like: "Resize IDE1 master, partition #1 (hda1) and use freed space").
• Specify the size of the new partition as a percentage of your entire hard disk.
• Click on "Forward".
• Continue to Finishing Ubuntu Installation

Manual partitioning

• Choose "Manually edit partition table"
• Listed will be your current partitions
• Select the partition you want to resize and press Enter.
• Select "Size:", press Enter.
• Select Yes, press Enter.
• Type in a new size in Gigabytes for your partition, it's recommended you free up AT LEAST 10 GB of free space for your Ubuntu install. Press Enter when happy with your changes. It may take some time to apply the changes.
• Create a swap partition of at least your amount of RAM (if you don't know, 2000 MB is a good value).
• Create a partition for your Ubuntu installation, at least 10 GB.
• Select "Finish partitioning and write changes to disk".

Master Boot Record and Boot Manager

GNU/GRUB2 is the boot manager installed in Ubuntu by default. If you use the Alternate CD you can choose Lilo instead. GRUB2, GRUB and Lilo are good Open Source boot managers so the main parts of the boot loaders are installed inside Ubuntu. This means Ubuntu is independent and avoids any need for writing to other operating systems. To accomplish this, the only thing in your computer outside of Ubuntu that needs to be changed is a small code in the MBR (Master Boot Record) of the first hard disk. The MBR code is changed to point to the boot loader in Ubuntu. You will be presented with a list of operating systems and you can choose one to boot. If you do nothing Ubuntu will boot after a ten second countdown. If you select Windows then GRUB or Lilo will chain-load Windows for you at the Windows boot sector, which is the first sector of the Windows partition.

If you have a problem with changing the MBR code, you might prefer to just install the code for pointing to GRUB to the first sector of your Ubuntu partition instead. If you do that during the Ubuntu installation process, then Ubuntu won't boot until you configure some other boot manager to point to Ubuntu's boot sector. Windows Vista no longer utilizes boot.ini, ntdetect.com, and ntldr when booting. Instead, Vista stores all data for its new boot manager in a boot folder. Windows Vista ships with an command line utility called bcdedit.exe, which requires administrator credentials to use. You may want to read http://go.microsoft.com/fwlink/?LinkId=112156 about it.

Using a command line utility always has its learning curve, so a more productive and better job can be done with a free utility called EasyBCD, developed and mastered in during the times of Vista Beta already. EasyBCD is user friendly and many Vista users highly recommend EasyBCD.

Install Windows 7 From USB Stick

Installing windows is preety easy with an Windows7 Disc, and with a Optical Drive.
But what if you want to install Windows 7 on a netbook or other computer without an optical drive? Fortunately, you’re not out of luck, because Windows 7 (and Vista, for that matter) can be installed from a USB storage key. Not only does installing from a USB key remove the need for a DVD drive, the install time is also greatly reduced – we shaved off minutes from the total install time. Our step-by-step guide will have you rocking the new version of Windows in no time!

Time = 1 hour What you need: 4GB USB key WinRAR Windows 7

 Note: This guide will only work within Windows Vista or 7.

1.    Format Your USB Key 

Plug in your USB key and back up any existing data stored on it. You’ll need to format the key before you can make it a bootable device.

Open up a Command Prompt as an Administrator. You can do this by finding the cmd.exe in yoru Windows/System32 folder, right-clicking the executable, and selecting “Run as Administrator”. Alternatively, type CMD in the Start Menu search field and activate the Command Prompt using Ctrl + Shift + Enter.

You should be under c:\Windows\system32 (assuming your Windows partition is the C drive). Type “diskpart” in the command line to enter the Disk Partition command line tool, which lets you format and create partitions on active disks.

Type “list disk” to reveal a list of all your active disks, each of which is associated with a number. Make a note of which one is your USB key, based on the capacity. In our screenshot below, our USB drive is Disk 6 (8GB).

Next, type the following commands, one at a time:

Select Disk # (Where # is the number of your USB disk. We typed “Select Disk 6”)

Clean (removes any existing partitions from the USB disk, including any hidden sectors)

Create Partition Primary (Creates a new primary partition with default parameters)

Select Partition 1 (Focus on the newly created partition)

Active (Sets the in-focus partition to active, informing the disk firmware that this is a valid system partition)

Format FS=NTFS (Formats the partition with the NTFS file system. This may take several minutes to complete, depending on the size of your USB key.)

Assign (Gives the USB drive a Windows volume and next available drive letter, which you should write down. In our case, drive “L” was assigned.)

Exit (Quits the DiskPart tool)

2.    Turn the USB Key into a Bootable Device

Insert the Windows 7 install DVD into your drive, and view the files that it contains. Copy all of the files here to a folder on your Desktop. We put the disc contents in a folder named “Windows 7”

Go back to your command prompt, running it as an Administrator. Using the “CD” command, find your way to the folder where you extracted the ISO files. Your command line path should look something like “C:\Users\USERNAMEHERE\Desktop\Windows 7\”.
Type the following commands:
CD Boot (This gets you into the “boot” directory)
Bootsect.exe /nt60 L: (where ‘L’ is the drive letter assigned to your USB key from the previous step)

Bootsect infuses boot manager compatible code into your USB key to make it a bootable device.
IMPORTANT: If you’re currently running 32-bit Windows Vista or 7, Bootsect will only work if you use the files from the 32-bit Windows 7 install disc. The Bootsect executable from the 64-bit version will not run in 32-bit Vista.

3.    Load the USB Key Up with the Install Files

 

Copy all of the extracted ISO files into the USB drive. You don’t need to do this from the command prompt. Just drag and drop the files from the “Windows 7” folder into the drive using Windows Explorer.
Your USB key is now all ready to go! Plug it into your target system and make sure you enter the BIOS (typically with F2 or F12) to temporarily change the boot order to allow booting from the USB key before your primary hard drive or optical drive. On the next restart, your system should automatically begin speedily loading setup files off of the USB key and entering Windows 7 installation.